slacker83
15+ Year Contributor
- 38
- 1
- Nov 17, 2003
-
Peoria,
Illinois
Everyone,
I've been working on this damn car awhile now and have the front case off so I decided I would check the tolerances on the oil pump gears. In the service manual it doesn't say where along the ridge to run the feeler gauge specifically like the haynes manual does. When I check the tip clearance about the center of the gear it is too tight even for the tightest standard, if I start the feeler gauge around the driven gear and run it along the drive gear I can fit a pretty large feeler in there which takes it past the service limit. Does that mean that I need to replace the gears?
Thanks,
Steve
I've been working on this damn car awhile now and have the front case off so I decided I would check the tolerances on the oil pump gears. In the service manual it doesn't say where along the ridge to run the feeler gauge specifically like the haynes manual does. When I check the tip clearance about the center of the gear it is too tight even for the tightest standard, if I start the feeler gauge around the driven gear and run it along the drive gear I can fit a pretty large feeler in there which takes it past the service limit. Does that mean that I need to replace the gears?
Thanks,
Steve
You must be logged in to view this image or video.