The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Rix Racing

2G O2 sensor voltage

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

galantracer53

10+ Year Contributor
172
0
Sep 21, 2012
schaumburg, Illinois
So on my 98 gsx. When I bought it, it had no downstream o2 sensor in it so I ordered on and put one in it. And it's only reading at .02 volts. Is that normal for a down stream o2 sensor? Alittle background on the car. It has not been tuned so that shouldn't be knocking anything out and it's on stock injectors. The front o2 sensor says it's at 0 volts too
 
How are you measuring the voltage?

Do you have any CELs?

Your front sensor should be bouncing around between 0.1 and 1.1 volts. If its dead, you'll be running pig rich and have a CEL for it.
 
Yeah there's a cel for it. I also forgot to mention that it has a 1g engine in it if that makes a difference. I was just trying to see if the the downstream o2 is good. I was planning on replacing the upstream one

And I'm reading the voltage with an obd logging program
 
Exhaust leaks will affect o2 voltages. Leaks outside air will push the signal lean/low voltage.
Much easier to have the problem with the rear o2 also obviously.
 
I have no exhaust leaks. I'm just trying to make sure my rear o2 sensor is good and dosent have to be replaced
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top