warren
10+ Year Contributor
- 376
- 13
- Dec 20, 2010
-
houston,
Texas
Lets start with I finished building my 2.3 stroker, and had the wire harness removed. I plug in everything needed to start. The only plug that isn't on is a 4 wire plug near the starter. The rest is two plug for emission.
I've noticed when leaving the key on the isc motor gets really hot.
I'm getting fuel but no spark
I've tried to use coil on plug and still no spark.
So the coil works.
I've replaced the cam angle sensor 4 months befored I spun a
bought a crank sensor from a guy here.
I've noticed when leaving the key on the isc motor gets really hot.
I'm getting fuel but no spark
I've tried to use coil on plug and still no spark.
So the coil works.
I've replaced the cam angle sensor 4 months befored I spun a
bought a crank sensor from a guy here.