Archer Fabrications
10+ Year Contributor
- 9,734
- 695
- May 9, 2011
-
Scottsdale,
Arizona
Hey guys, so I'm developing the long awaited topmount line up (starting off t3) and i need a few measurements, verified measurements with pictures would be the best for this. Reason I'm asking is cause motor is out of my car and i have no refrence points.
Here is what i need:
1.Measurement from head surface on exhaust side (back of your manifold flange) to the radiator support on a 2g, measurement taken from by the #2 runner straight out would be best.
2.Same measurement as above, but to a stock radiator on a 2g
3. Same measurements as #1 but with a 1g
4. Same measurements as #2 but with a 1g
Thanks in advance, if there are other measurements i need I'll post here. Appreciate it everyone!
Here is what i need:
1.Measurement from head surface on exhaust side (back of your manifold flange) to the radiator support on a 2g, measurement taken from by the #2 runner straight out would be best.
2.Same measurement as above, but to a stock radiator on a 2g
3. Same measurements as #1 but with a 1g
4. Same measurements as #2 but with a 1g
Thanks in advance, if there are other measurements i need I'll post here. Appreciate it everyone!