- Thread starter
- #26
1990TSIAWDTALON
Moderator
- 11,540
- 8,208
- Nov 14, 2013
-
Independence,
Kansas
Updated Spec Sheet for the Small Block Chevy build. Like I said, very good bottom end numbers, right where I like to see them!!!
I am waiting on the Nitrided cam from Comp Cams. It is supposed to ship 6/1/21. It is a XE274H grind and should work really nice in this setup for torque all under 6500 rpm's. This will all be running through a 4L60 transmission with a "Thor" converter coupled to the 3:73 posi in the Red '86 Z28. Subframe connectors, driveshaft loop....all the goodies.
Keep watching. When the motor is complete, the trans will go to the shop for a couple of upgrades before taking it to the track. Hopefully mid-summer!!!! Fingers Crossed!
Pops
I am waiting on the Nitrided cam from Comp Cams. It is supposed to ship 6/1/21. It is a XE274H grind and should work really nice in this setup for torque all under 6500 rpm's. This will all be running through a 4L60 transmission with a "Thor" converter coupled to the 3:73 posi in the Red '86 Z28. Subframe connectors, driveshaft loop....all the goodies.
Keep watching. When the motor is complete, the trans will go to the shop for a couple of upgrades before taking it to the track. Hopefully mid-summer!!!! Fingers Crossed!
Pops