The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support STM Tuned

Drag Race Build my journey to a 9sec street car

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Couple more things done this morning before work

5C71E560-C5BD-4592-9FF1-AA41CF42BB38.jpeg


Got some sfi roll at padding put in on the passenger side and a piece on the front windshield bar on the driver. Waiting to do that last piec as I don’t know where it’ll fit with the window net when we put that in.

EE8A093B-0399-4176-8367-1947440E483D.jpeg


also got the nitrous controls wired up. I’ve been contemplating changing this setup a little as I’m the nitrous activation is in the shifter handle but with the 3g shifter it’s a pain to release the shifter lock for park, reverse and drive.
 
2319C62A-6ACA-472B-B9A6-571B5EB1A6C0.jpeg
Finally got the spare tire hump hole covered


Looking more and more complete

7165B017-4AD5-4CB3-AECD-63B3E55CA089.jpeg


might have to get some rear trim and put back in and get some carpet back in there
 
Last edited:
These are getting shipped today. Such a piece of art.

098F032F-0D01-4285-A3D7-0A3121C7F12E.jpeg


Also got my bracket To make my plate relocation from motion raceworks.

9FCA0367-6DF1-42F7-8A14-14B4B6AB0014.jpeg


also picked up one set of rotor hats the fronts are coming from Wilwood. Also picking up calipers tomorrow.
83102D2F-63E9-4CF8-86D5-0D6051D971DC.jpeg


Ready to get some good brakes on this thing and drop some more weight as well.
 
couple of things
wilwood1gbrakes6.jpg

few more things bought for the brakes

fiancee got a couple pics with her new camera this weekend of the car and a small local meet we went to as well

frontshot1.jpg


34shot1.jpg


34shot2.jpg


rearshot2.jpg


rearshot3.jpg


picking up the front rotor hats today so i can get them sent out to get machined to fit then finishing up gathering parts to get the wilwoods on the car.
 
Picked some more brake parts up yesterday.

2FB98136-4582-4819-A9B2-F731EBDDBDCF.jpeg


Got to order the last three rotors, order mounting hardware, send the rotor hats to get machined to fit, and I can get started installing everything.
 
So I sent my rotor hats off to antilag racing to get machined on the 28th. USPS has lost them:cry:. Started a service request to get them located. Hoping they find them ASAP
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top