Mutt Turbo's?

[jw]

I have the TA 14b/16g setup. I wondered if they have a j-pipe that will look like a T25 outlet location but pointing towards the driver side for my coming FMIC.

 

[L2RTSiAWD]

I have a 2g ETA22 18psi by 3500rpms with the elbow so my turbo bolts to the stock 2g IC piping with no need for a J-pipe.

Later,

 

[jdmawd]

you can have dsm-performance weld the elbow on or leave it off. depending on your intercooler setup. i chose to have it done without the elbow because i was doing the IRC at the sametime here is the pic of the j pipe that is included with the IRC kit.

 

[jdmawd]

and the other

 

[jw]

I just PMed you.

 

[IPT]

Originally posted by jw
I have the TA 14b/16g setup. I wondered if they have a j-pipe that will look like a T25 outlet location but pointing towards the driver side for my coming FMIC.

Just tell them what way you want it to face.. I have never liked those j-pipes. I like the garrett setup with the turbo outlet facing towards the ground and then just add the elbow which every way you want and away you go..:laugh:

 

[jw]

I already have the TA. I will try call Pete tomorrow and see what they have to make it work.