The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

mtx-l install

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jd21

10+ Year Contributor
69
0
May 18, 2010
new tripoli, Pennsylvania
just got my innovative mtxl, im using the front o2 location im still really new to tuning and link i have v3 my question is can i just hook up the yellow to pin 4 and the brown not sure which pin the brown is instead of running o2 simulation in link.
 
am i cutting the wire for pin 4 and just hooking the yellow up to it and them just hook up the guage normally
 
So if I'm going to be running v3, I hook up the yellow wire to pin 4 and the brown(nbs) and white wire( for dimming) are to be left unhooked and v3 will do the nbs for me? I'll be using front o2 spot. And by hooking up the gage normally stated in the earlier post is just referring to the red and black wire right?
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top