JuGs
10+ Year Contributor
- 674
- 0
- Jul 20, 2008
-
Marshall,
Wisconsin
Ok will I have come to time to build a motor. Mine is almost not drivable now. Heres what Im at for a buils thus far. Hopefully it will hold some good numbers for a DD.
Block
6 bolt block
Stock crank
Eagle H-beam rods
Ross pistons
BSE
ACL rod/mains
Head
Decked
3 angle valve job
New glides/seals
Evo 9 valves and springs
BC 272 cams
Thinking of getting done to head
polished and ported
adjustible cams
Im only looking to be able to hold around 500awhp. I have almost all the mods already to support close to my goals but this is what my motor build is going to be thus far. I have it all ready to be put together but a few items for head. This build should hold my HP goals with no issue correct?
Block
6 bolt block
Stock crank
Eagle H-beam rods
Ross pistons
BSE
ACL rod/mains
Head
Decked
3 angle valve job
New glides/seals
Evo 9 valves and springs
BC 272 cams
Thinking of getting done to head
polished and ported
adjustible cams
Im only looking to be able to hold around 500awhp. I have almost all the mods already to support close to my goals but this is what my motor build is going to be thus far. I have it all ready to be put together but a few items for head. This build should hold my HP goals with no issue correct?