This is a warning to any one who is planning on buying an exhaust from Megan Racing. I purchased there "full 3inch system" from the down pipe back. The inlet on the down pipe isn't three inches it's 2 3/4 inch. not a big deal. It also sucks to connect to a stock O2 housing not sure about an after market one. you can't fit a socket on the nuts to tighten the down pipe. Secondly the craftsman ship of this exhaust is very very bad. The flanges aren't lines up perferctly with each other and i am personally having a problem with the exhaust hangers rubbing my drive shaft.
I have tried to contact Megan several times about the hanger issue and to try to resolve the problem ASAP. It has been 3 weeks and no call back from them. so if you plan on buying this exhaust system you better have a friend that knows how to weld or be good at welding your self. I hate the fact that i ditched my old exhaust, APexi N1, for this because I wanted full 3" and stainless. IMO you are better off getting the Buschur system for only $100 more shipped. If any one hasany other questions about this experience feel free to PM me.
I have tried to contact Megan several times about the hanger issue and to try to resolve the problem ASAP. It has been 3 weeks and no call back from them. so if you plan on buying this exhaust system you better have a friend that knows how to weld or be good at welding your self. I hate the fact that i ditched my old exhaust, APexi N1, for this because I wanted full 3" and stainless. IMO you are better off getting the Buschur system for only $100 more shipped. If any one hasany other questions about this experience feel free to PM me.