The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

Mcloed Sintered Iron Clutch Is awesome

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MNGSX

20+ Year Contributor
2,538
25
Mar 30, 2003
Bloomington, Minnesota
I installed a Mcleod Rev Lock II clutch.. Its a sprung sintered iron disk and HD pressure plate.

It is'nt overly grabby nor as stiff as a ACT 2600... It slips w/o chatter on normal driving but launches predictably time after time...

Its the best clutch I have ever had in my DSM..
 
I didn't realize Mcleod was making a clutch for our cars. A new clutch is on the to do list this winter as the centerforce is slipping bad. Where did you purchase yours from?
 
Damn, looks like the sintered iron package is discontinued. :notgood:
 
They still have some in stock.. I think they need to advertise more to the DSM crowd. They do well with the V8 market.

Also they still have the DSM splined hub and spring assembly and they still sinter the same diamter disk for another application.

Honda preludes have a 8 7/8" disk diamter too and a revlock II for it still in the catalog.

So they still make the identical disk with a different hub on it.

This all means they can make one at any time.. Just rivet up a non stocking combo to make a former stocking one.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top