The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Morrison Fabrication

logging and tuning help...

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

t3talon

Probationary Member
5
0
Feb 10, 2005
Arlington, Washington
first off i have a 91 talon AWD turbo

t25 turbo (14b had probs so put this on)
FMIC with 2.5 inch pipes
s-afc 2
3" ls1 maft
translator
3"exhaust 02 housing back, straight pipe
act 2600
ngk r plugs
accel 8mm wires
boost/a/f gauges
palm datalogger
walbro 255

i got all my acf settings at -15 high, -10 low

i just got my logger and i dont know how to use it to tune my setup..or how to tune for future mods...any help would be appreciated...THANKS

i need to know...

injp-?
knck-knock?
02-r-?
tps-?
isc?
tima-timing advance?
o2-f-?

what do they all mean!!? :cry:
what should my readings be around for best power gain?

thanks again....
 
i got a palm m105, with the mmcd data logging freeware.....well HAD, i replaced the batteries and now its gone!!! how do i get it back? i have a hot sync port holder with a serial cable, which i got plugged into the back of my computer in the serial port..
PLEASE HELP!!
HOW DO I GET IT BACK??

i know about this site but its a .zip file and i need a .prc file..how do i change the .zip to a .prc or where can i find the .prc file??

thanks any response will help...
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top