kiggly
Supporting Vendor
- 319
- 194
- Feb 17, 2003
-
Ann Arbor,
Michigan
This is the Build Thread for Kiggly Racing Taco-Bishi. Reply below.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
The intake is an evo8 mivec cam gear. I designed and machined that fitting and drove the fuel pump off the exhaust cam in the laser, and that piece is still on it for now. This truck will be a cable drive to a fuel pump and tank in the bed.What are the center pieces on both cam gears?
Vader fuel pump drive on exhaust cam and looks to be a mivec setup on the intake.What are the center pieces on both cam gears?
Just read above. Thanks for all the inspiration never saw the car in person but always kept up with what you did with it.So is the laser done or is this just a spare motor.
I made some really good progress over the past couple days. The cage cut and bent from the cad model is amazing compared to coping all the tubes by hand. I will never go back to that method!
The laser did not really fit in any racing classes anymore. It had a great run, but it is time for some new challenges.This looks amazing! May I ask why you retired the Laser? Just curious