2G Intercooler pictures

[Rohitter7878]

Can you guys add some pictures of your intercooler setups and how you have the piping routed on the driver side specifically with no bumper on?

 

[1990TSIAWDTALON]

This was when I was running a Bastard 20g turbo but I have the same routing now that I run Holset turbo's.
The intercooler is a VRSF short route kit, unfortunately not produced anymore.
Marty

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.

 

[Rohitter7878]

I have this to work around with

You must be logged in to view this image or video.

 

[Dusty Landrum]

This is exactly what you need and will bolt right up with no issues, as long as you are running a 16G type or similar turbo. If not you can still make it work though with very little effort.

Intercooler Piping Kit + BOV For Eclipse Talon 95-99 4G63 2G

www.cxracing.com

You must be logged in to view this image or video.

You must be logged in to view this image or video.

You must be logged in to view this image or video.