The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Installing clutch help.

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

2gGSXEclipse

15+ Year Contributor
398
4
Apr 7, 2008
847, Illinois
Alright guys im about to install a new clutch and ive read things about "shimming the pivot ball" and things like that. Is there anyone who can go more in depth aabout that or has pictures of it. Also is there anything else I should do while installing it. I have a fidanza flywheel, ACT 2100 PP, and street faced disc. I also ordered the OEM throw out. If you guys can give me some pointers it would be appreciated.

thanks
 
If you're re-using your fork and ball I would put two ss washers in there, a head bolt washer maybe the same thickness though. I would recommend replacing the fuel filter while the tranny is out if you haven't already. Make sure to put a little grease on the pivot ball and TOB. I would recommend replacing the slave too if it's old.
 
Last edited by a moderator:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top