first off, no one has posted anything about these yet so id figure ill help the community by sharing my experience with them and to show you how to install them.
PLEASE RATE, SO I GET AN IDEA ON HOW U FEEL ABOUT THIS HOW-TO! THNKS
WHY SHOULD I REPLACE MY SHIFTER PLATE BUSHINGS???
well if u havent replaced your shifter plate bushings yet chances are they look like mine, all worn out, dry rotted and weak, this causes a spongy/numb feeling when shifting and may cause missing a gear because having worn out bushings will cause more play therefore when your shift you actually move the whole plate squishing all the weak bushing to the side instead of just the shifter stick, so this can get really annoying when trying to shift fast at the track and you do nothing but miss 3rd all day (me ).
RESULT:
a very good improvement replacement part for a 15 year old piece of rubber, stiffer mount, and shifts are accurate and smooth just like new!!!
here is a little easy to follow how to,
TOOLS: 12MM socket with ratchet and preferably a 6 inch exention.
PARTS: ENERGY SUSPENSION POLYURETHANE BUSHING KIT FOR SHIFTER PLATE
WHERE TO BUY:$11.00 @ EXTREME PSI http://www.extremepsi.com/store/customer/product.php?productid=17328&cat=571&page=1
IF:
you like it,
you hate it,
you apreciate it,
or you dont care,
let me know... any feedback is good.
PLEASE RATE, SO I GET AN IDEA ON HOW U FEEL ABOUT THIS HOW-TO! THNKS
WHY SHOULD I REPLACE MY SHIFTER PLATE BUSHINGS???
well if u havent replaced your shifter plate bushings yet chances are they look like mine, all worn out, dry rotted and weak, this causes a spongy/numb feeling when shifting and may cause missing a gear because having worn out bushings will cause more play therefore when your shift you actually move the whole plate squishing all the weak bushing to the side instead of just the shifter stick, so this can get really annoying when trying to shift fast at the track and you do nothing but miss 3rd all day (me ).
RESULT:
a very good improvement replacement part for a 15 year old piece of rubber, stiffer mount, and shifts are accurate and smooth just like new!!!
here is a little easy to follow how to,
TOOLS: 12MM socket with ratchet and preferably a 6 inch exention.
PARTS: ENERGY SUSPENSION POLYURETHANE BUSHING KIT FOR SHIFTER PLATE
WHERE TO BUY:$11.00 @ EXTREME PSI http://www.extremepsi.com/store/customer/product.php?productid=17328&cat=571&page=1
IF:
you like it,
you hate it,
you apreciate it,
or you dont care,
let me know... any feedback is good.
Attachments
Last edited: