FastRthenU
20+ Year Contributor
- 582
- 0
- Dec 15, 2002
-
Ontario_Canada
YOur right gunnertsi
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Originally posted by doug
Have you decided on where to get the piping done?
Originally posted by draculia
ah yes, i was gonna pick up the 27x8 one they had. then i found out that you can order them from their site for the same price, so i put it off so i could get my turbo first. how do the welds look?
That was my guess, but I wasn't sure. Thanks Ken for splainin'!Originally posted by KenTSIII
The one w/ the endtanks on the same side would be like cutting the core in 1/2 long ways & having a FMIC that was twice as long.
I didn't know about that-- good info! I know nothing about pressure drop. Why would that particular design have more? Is it because the path the air must travel is twice as long?Originally posted by KenTSIII
That FMIC would have 1/2 the amount of flow as normal & twice the pressure drop.
Originally posted by CH152
Press bent intercooler pipes? haha guess that could work
I believe he said it's 3". I don't know if he's actually measured it, though.Originally posted by draculia
on his sight he advertises them as 3.5" thick, so my question to the one that bought this ic, what's the thickness?
Originally posted by Ricardo
it was only 400 bucks on ebay. 27x10x3