How do you remove the O2 sensor/wire?

[RipperXX]

Ok I am in the process of replaceing the turbo's mounting gaskits since there leaking bad as hell and my friend DIDNT EVEN PUT SOME BACK!

well anyway I have the radiator fan, Maf, intake pipe, etc. out of the way and now i think i just have to unbolt the exhaust pipeing and the lines to the turbo before i can remove it..

BUT i dont know how to get the O2 sensor out, since I dont see how to get the wire off of it... i fallowed it back and i see where it plugs in but that dont realy help... becouse i still wont be able to get a socket over the 02 sensor it's self to remove it...

I know you guys are probly laughing cause it's probly realy easy but plz help me out here...

 

[flytalon93]

It sounds like you will removing the O2 Housing anyways to replace the gaskets right? If you will be removing the housing then just use an open end wrench. If you will not remove the housing then you will need the gapped socket, which is a regular socket but has a slit in the side so the wire can go through. I can't remember the size because I used a adjustable wrench when I had my housing off. Replaced mine with 2G housing and manni. Much better flow. good luck.