Maglin
15+ Year Contributor
- 872
- 14
- Apr 30, 2004
-
Wichita,
Kansas
I'll have to get you that info. I just took my Upper radiator hose to the parts store with a measurment of how long I needed. I ended up with a pice about an inch or so to long but it worked. Just needs some trimming in the near future. The braket that holds the waterpipe into the water pump was cut off along with half the water pipe. You will have to either use a cushion clamp or weld on a braket and bolt it to the motor mount so that the coolant pressures don't blow the water pipe off... You can guess that I didn't do that originally and learned that lesson the hard way. I just welded on a bracket that I built and used the bolt right above the water pipe to kept it in place. When I next take it off I plan on cutting off completely the nipple that used to go to the oil filter housing and welding the bracket on the bottom so that it's easier to install that one bolt.