The Central Hub for DSM Community and Information

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. This is where the DSM platform history is documented and archived. Log in to help us in our mission, and to remove most ads from the browsing experience.

hole in fire wall

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

ericismyname

20+ Year Contributor
682
0
Oct 14, 2002
West Des Moines, Iowa
hey guys im gonna put neons in my car and i need to know where the fire wall is behind the dash, thanks guys.
 
Originally posted by ericismyname
hey guys im gonna put neons in my car and i need to know where the fire wall is behind the dash, thanks guys.

The firewall is the wall seperating you in the passenger compartment from your engine.:p
Do you mean you want a hole through the firewall? If so I can help you out. I have my boost gauge tube through my steering column boot. Just cut an X in it. No big hole and it works for a wire. Not sure about 1st gens but I think 2nd gens have another hole near the passenger side. I hope this is what you wanted.
 
you can cut thru any existing gromment at the firewall. or drill your onw hole, just be sure you do not drill into any lines or wire bundles. As for the stering colums, look under your dash, drivers side, you will see a 2 inch diameter metal shaft, go down till it disapears into rubber, poke and your done. As for the passanger side, just pull the carpet back a little bit up top. You should see it, really not that hard.
 
There is a little rubber plug that I went through right below the brake fluid resevoir, go down about 6" and its a little plug, just tap through that, I have FP rewire and boost gauge vaccum line running through it with lots of space to go.
 
Add Value - Be Respectful - No Trolling - No Misinformation - Participate Often!
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto STM Tuned

Vendor Updates

Latest Classifieds

  • For sale 4G63 Valve cover with catch can setup
    Power coated wrinkle black valve cover, custom catch can baffled setup with black braided...
    • Dsm_canadian_mike
    • Updated:
    • Expires
  • For sale 4G63 1g/2g Auto Welded Center Diff
    1g/2g Auto Welded Center Diff. Price is shipped USPS flatrate. Message 702-741-6987.
    • Galant665
    • Updated:
  • For sale 2g 2G AWD Rear Knuckle Set
    2G AWD Rear Knuckle Set $240 + shipping and PayPal fees* just replaced the upper bushing with...
    • jersygsx
    • Updated:
    • Expires
  • For sale 4G63 Heads/ head parts
    Heads/ head partsNever ran ready to bolt up 1G head Ferrea dual valve springs/ retainers...
    • Dsm_canadian_mike
    • Updated:
    • Expires
  • For sale 2g 2G Spare Tire Trim & Tool Pouch
    2G Spare Tire Trim & Tool Pouch $40 + shipping and PayPal fees* tool pouch has the tools...
    • jersygsx
    • Updated:
    • Expires
Back
Top