banishedmunk
15+ Year Contributor
- 1,055
- 23
- Jun 6, 2006
-
Miramar,
California
Everything is best offer. DO NOT LOWBALL. I will deliver to an extent if the price is right. I live near mira mesa so take that into consideration. I have lots of the dumb misc. stuff that most people wouldnt think of so if there is something you need and i havent listed it just ask me and ill see what i have in inventory. but here is the major stuff.
Intercooler with the shocker is a 23.5x11x3 with 3" in/out. 31" from the outer most portions
large intercooler with tial flange is 2.5 inlet 3" outlet custom made by full-race with a garrett core. use of intercooler will require modifications. and use of either scirroco or honda half radiator. dimensions of core without end tanks is 24x12x3.5. end tanks make it 30"
same side intercooler is a 22x8.5x3.5 core with endtanks and inlet it is 29"
i have one complete set of 1g motor mounts and another minus the front roll stop
also a set of 1g water pipes 2 91+ and 1 90
90 oil filter housing
greddy oil filter adapter
90 manual steering column with key
1g punishment down pipe with aem wideband o2 sensor stuck in it
2 1g heads
numerous sets of oem vale springs and retainers
2 2g thermostat housings
1 6 bolt motor with a bad crank block still good
4 oem 6 bolt cranks all will need resurfaced
a set of 9.0:1 stroker .020 ross racing pistons will need new wrist pin locks. were removed due to contacting oil squirters.
super tech dual valve springs and retainers
1g maf translator
7 bolt flywheel recently resurfaced
numerous 1g ecu's all non eprom
n/t throttle body
and everything in the bins
Intercooler with the shocker is a 23.5x11x3 with 3" in/out. 31" from the outer most portions
large intercooler with tial flange is 2.5 inlet 3" outlet custom made by full-race with a garrett core. use of intercooler will require modifications. and use of either scirroco or honda half radiator. dimensions of core without end tanks is 24x12x3.5. end tanks make it 30"
same side intercooler is a 22x8.5x3.5 core with endtanks and inlet it is 29"
i have one complete set of 1g motor mounts and another minus the front roll stop
also a set of 1g water pipes 2 91+ and 1 90
90 oil filter housing
greddy oil filter adapter
90 manual steering column with key
1g punishment down pipe with aem wideband o2 sensor stuck in it
2 1g heads
numerous sets of oem vale springs and retainers
2 2g thermostat housings
1 6 bolt motor with a bad crank block still good
4 oem 6 bolt cranks all will need resurfaced
a set of 9.0:1 stroker .020 ross racing pistons will need new wrist pin locks. were removed due to contacting oil squirters.
super tech dual valve springs and retainers
1g maf translator
7 bolt flywheel recently resurfaced
numerous 1g ecu's all non eprom
n/t throttle body
and everything in the bins
Attachments
-
100_0603.jpg70.3 KB · Views: 312
-
100_0604.jpg63.9 KB · Views: 300
-
100_0605.jpg45.1 KB · Views: 310
-
100_0606.jpg60.8 KB · Views: 301
-
100_0607.jpg61.8 KB · Views: 305
-
100_0608.jpg50.2 KB · Views: 298
-
100_0611.jpg60.1 KB · Views: 295
-
100_0613.jpg56.7 KB · Views: 303
-
100_0614.jpg31 KB · Views: 310
-
100_0621.jpg70.6 KB · Views: 301
-
100_0618.jpg45.6 KB · Views: 307
-
100_0620.jpg27.7 KB · Views: 313
-
100_0623.jpg80.4 KB · Views: 308
-
100_0624.jpg64.5 KB · Views: 296
-
100_0625.jpg78.6 KB · Views: 292
-
100_0626.jpg61.3 KB · Views: 289
-
100_0627.jpg70.1 KB · Views: 291