Help Intalling Boost Controller

[Spln_Hrd]

A friend of mine bought this boost controller off Ebay and were having difficulty figuring out how this thing works. Anyone with first hand experience please let me know how to make this function correctly.

http://cgi.ebay.com/ebaymotors/MANU...Z6763QQitemZ8031309949QQrdZ1QQsspagenameZWDVW

 

[paul s]

http://www.vfaq.com/FAQlocator-index.html
look under turbo and installing boost controllers.

 

[Spln_Hrd]

I understand how to install a boost controller. I hooked up to mine by simply disconnecting my vacuum lines and put this one on those lines. I tried both combinations wastegate to top then bottom, I set the boost setting at high low and everywhere in between with no results.

 

[dalatinromeo]

I never used that mbc before, but it seems like any other boost controller. I'm assuming you hook up one end to the wastegate actuator nipple, and the other end to a pressure souce.

The only thing I don't know is which line goes to which port. I am not sure how to test either. If noone on here can tell you which line goes to which nipple, I would just try one way, and if it doesn't work or you get uncontrollable boost; just switch the two lines off the mbc. Hope this helps.

Stay boostin

 

[oldman]

Does it have a ball and spring in it?

 

[SICKWITitTSI]

man from what I see in the link it seems to be a cheap knock-off of the Turbo smart mbc i've seen in all the magazine, if it's not working for you man just send it back!

 

[mirkoelek]

its maybe "bleeder" kind, try to hook this way: from the pressure source to the T connector, other side of the T connector to the actuator (turbo), and third side of T connector to the boost controler IN , the OUT side of the boost controler leave it opened.