headunit Stopped Working

[DSMJake]

OK i installed a kenwood headunit in my car about a month or 2 ago, all was good worked fine until yesterday when i got in my car from leaving work it had no power when i got home i made sure the power wires were getting juice they were the power , memory and ground wire were connected good and i checked the radio fuse in the engine bay but i cant find the fuse was fine anyone have some ideas what could be the problem.

 

[chanley talon]

You might have blown the fuse inside the radio!

 

[DSMJake]

Checked the 10 AMP fuse in the back its good and put a new one while i had it out. Any more ideas?

 

[RedTurboEclipse]

press the reset button on the deck if applicable. remove the harness from the deck and then put it back. check the ground cable.

 

[DSMJake]

press the reset button on the deck if applicable. remove the harness from the deck and then put it back. check the ground cable.

good idea with the reset button but none of it worked :/ any more ideas?

 

[->PrOjEcTGS<-]

It could be dead... I had a Kenwood eXcelon unit back in the day that just died on me. I took it in to the authorized kenwood repair shop around town and they said it would be cheaper for me to buy a new unit. Sorry man just my experience with Kenwood units.