The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Morrison Fabrication

headgasket

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

slick06emp

10+ Year Contributor
53
1
Apr 28, 2009
Lawrenceville, Pennsylvania
need a bit of advice.

my block was decked .007
head was decked .006
bored .020 over
im running Kelford 275 cams

im going with an mls head gasket.

any input on the thickness?
 
My block was resurfaced and the head was cut I think .010 and I'am running bc 284 cams with a stock thickness mls gasket.
 
IF your picking thicknesses you using the wrong headgasket brand. Only OEM MLS or Felpro Permatorque. Both are about .055 thickness.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top