miguelmcv
Supporting Member
- 2,717
- 255
- May 3, 2009
-
Fresno,
California
Hey guys, I am moving and trying to take away all what I can, Here are some pics, but more pics will be posted later.
Any interest or questions PM, call or text, (323)240-2582
Front Evo brembos with pads, hardware and rotors. SOLD
6 bolt short block ( standard with new stock pistons but bottom end is not good, it was rebuild 300 miles before it knocks).
95 gsx eprom ecu (stock). SOLD.
2ga aftermarket head lights with Factory Wire Plug, Plug and play, (dont know how they end up in my garage). SOLD.
ACT clutch (don't know anything about it). SOLD.
Awd, fwd, 6, and 7 bolt flywheel (1 is road race light weight fwd 6 bolt).
2g awd trany and t-case( good working conditions, passenger seal was leaking). SOLD
2g awd trany, was working good when I try to inspected and couldn't assemble it backSOLD
2g awd trany internal parts (just parts, no case).
Evo3 O2 housing (I start to ported but never finished)
Stock O2 housing.
Turbo install kit (feed line, return line, water lines, gaskets and j pipe for SMIC).
8an SX fuel filter with line (11 inch long, from filter to fuel rail).
2g stock radiator fans. SOLD.
Both Front Evo 8 Spindles and hubs with lower arm (bolt joints in good conditions).
MLS Head gasket (Don't know the specs but will take some measurements).
2g upper aluminum radiator hose. SOLD
95 GSX front brake calipers with rotors, this are the 2 piston calipers, (Rotors and calipers are in good conditions). SOLD.
Evo 8 rear brembo calipers with pads and hardware, Pads are half life on it.
3 1G AWD starter shield,,,,
2 1g FWD starter shield.SOLD.
1 2g AWD starter shield. SOLD.
2 2G, FWD starter shields.
2g Steering oil reservoir with 6AN welded bangs.
2g Steering Pump with 6AN weld bungs.
Have a almost complete electric mr2 power steering pump, for you guys that wants to remove your steering pump to make room, (Steering pump, Steering ECU, Steering Relay, Steering Driver and wiring harness).
Set of 6 bolt pistons and rods.
Set of almost new 6 bolt pistons,
2g GST Brake Master Cylinder and Booster with reservoir.
3g Brake Master Cylinder, This is Ideal for your big brake upgrade.
I found some 6, 8 aluminum weld bungs and fittings, I will insert pics once I have them.
ATTACH]145232[/ATTACH]
Any interest or questions PM, call or text, (323)240-2582
Front Evo brembos with pads, hardware and rotors. SOLD
6 bolt short block ( standard with new stock pistons but bottom end is not good, it was rebuild 300 miles before it knocks).
95 gsx eprom ecu (stock). SOLD.
2ga aftermarket head lights with Factory Wire Plug, Plug and play, (dont know how they end up in my garage). SOLD.
ACT clutch (don't know anything about it). SOLD.
Awd, fwd, 6, and 7 bolt flywheel (1 is road race light weight fwd 6 bolt).
2g awd trany and t-case( good working conditions, passenger seal was leaking). SOLD
2g awd trany, was working good when I try to inspected and couldn't assemble it backSOLD
2g awd trany internal parts (just parts, no case).
Evo3 O2 housing (I start to ported but never finished)
Stock O2 housing.
Turbo install kit (feed line, return line, water lines, gaskets and j pipe for SMIC).
8an SX fuel filter with line (11 inch long, from filter to fuel rail).
2g stock radiator fans. SOLD.
Both Front Evo 8 Spindles and hubs with lower arm (bolt joints in good conditions).
MLS Head gasket (Don't know the specs but will take some measurements).
2g upper aluminum radiator hose. SOLD
95 GSX front brake calipers with rotors, this are the 2 piston calipers, (Rotors and calipers are in good conditions). SOLD.
Evo 8 rear brembo calipers with pads and hardware, Pads are half life on it.
3 1G AWD starter shield,,,,
2 1g FWD starter shield.SOLD.
1 2g AWD starter shield. SOLD.
2 2G, FWD starter shields.
2g Steering oil reservoir with 6AN welded bangs.
2g Steering Pump with 6AN weld bungs.
Have a almost complete electric mr2 power steering pump, for you guys that wants to remove your steering pump to make room, (Steering pump, Steering ECU, Steering Relay, Steering Driver and wiring harness).
Set of 6 bolt pistons and rods.
Set of almost new 6 bolt pistons,
2g GST Brake Master Cylinder and Booster with reservoir.
3g Brake Master Cylinder, This is Ideal for your big brake upgrade.
I found some 6, 8 aluminum weld bungs and fittings, I will insert pics once I have them.
ATTACH]145232[/ATTACH]
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Attachments
Last edited by a moderator: