2G Fuel Injector Development injectors?

[lapointebrett]

Before my HG blew and I rebuilt my engine, the same day at the dyno my tuner put new 725cc FID/Fuel Injector Development injectors in. When they put them in they didn't seal properly with the fitting on the injectors so he pulled some spare fittings and o-rings and used those to seal. When I was putting everything back together the rubber fittings got messed up.

Problem is now after getting my car back together there's a bad vacuum leak from the injectors preventing me from driving the car. Any help would be much appreciated, just seeing if anyone has ever used these injectors and what they did to make them seal.

 

[danl]

Maybe a picture of the injectors? They should be made by a common manufacturer like Bosch and modified by the company who sells them? That means a generic o ring kit would work if we can determine what style they are.

 

[lapointebrett]

All I know is that they are 725 cc ev14 high impedance injectors, I thought about buying the FIC O ring kit but I'm just not sure they will work with these

 

[danl]

Call whatever vendor you want to do business with, but you need an o ring kit for the ev14 injectors for a Mitsubishi 4g63 application.

 

[steve]

These ones? http://www.fuelinjectordevelopment.com/750.html

You must be logged in to view this image or video.

 

[lapointebrett]

Okay I'll probably just order a kit then and yes those look like they're it