The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

FS: 91 Eclipse GSX

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

throttlebody

Probationary Member
1
0
Apr 9, 2011
Philadelphia, Pennsylvania
I am selling my 1991 Eclipse GSX. I have owned and raced this car for the last couple of years and it is time to move on to something else. Car is located in center city Philly and I am asking $3000/obo.

It has approx 213k miles on the chassis; about 50k since a rebuild on the block and about 4k since the valves and timing belt were redone. Runs well and is fast, reliable and safe.

I cannot remember all the details and am a little behind on updating my list but this is most of it. Of course it will come with all my receipts and notes from the past couple of years. Please ask any questions and I will try my best to answer them promptly. Has :


DSMlink V3 lite

Evo III 16g turbocharger

Manual boost controller

K & N filter in custom cold air box

Dejon Tool intake pipe

2g mass airflow sensor w/ adapter harness

"Crushed" 1g BOV

Punishment Racing front mount intercooler w/ mesh guard

2g exhaust manifold - ported and silica coated

Apexi N1 full 3" exhaust

Walbro 190lph fuel pump with STM rewire kit

Fuel Injector Clinic 850cc /min (83lb/hr) injectors

Kynar check valve inline w/ PCV

NGK bpr7es spark plugs

Taylor plug wires

AEM uego Air / fuel guage

SunPro 20psi boost guage

Mishimoto aluminum radiator w/ ducting

Secondary slim fan on manual switch

Radiator water mist system on manual switch

ABS delete

Air conditioning delete

Cruise control delete

3100 lbs weight

AM/FM receiver w/ usb, auxiliary in & SD card slot; 1 speaker

K-Sport coil overs w/ 36 way adjustable shocks & camber plates (410lb front; 350lb rear)

Front and Rear strut tower bars

RM 24mm rear swaybar

Ventshade rain guards

Rally Armor mud flaps

Polyurethane motor mounts

2g front dual piston calipers

2g front brake rotors

Hawk HP+ brake pads

Custom 24" x 8" hood vent

Custom hood scoop

Corbeau drivers seat (still have stock)

G-Force 6 point harness

autopower 4 point roll bar

Subaru Outback fog lights

TRS front & rear nylon tow loops

Kill switch

Sunroof delete

Non- power antenna


Wheels & Tires:

1g stock alloy wheels 16" x 6" w/

Bridgestone Potenza - 205/55r16

Ford Probe GT alloy wheels 16" x 7" w/

Dunlop Direzza Star Specs - 225/50r16



Needs:

Pads and rotors all around

Tune up and more fine tuning

Paint is pretty beat and it has some dents and dings

TLC



can also include small laptop w/ custom stand for tuning and data logging

a couple of pics, I do have more:

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top