The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support STM Tuned

2G front o2 sensor

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

4everboosted

Proven Member
97
3
Dec 6, 2013
Butler, Pennsylvania
To make a long story short im moving my wideband to the rear o2 sensor housing, i bought a new front o2 sensor, and i noticed theres two plugs it can connect to. One is under the fuse panel and one is somewhat close to the back of the valve cover, near the clutch linkage. Which one is it supposed to go to and what is the other one for?
 
The connector should be found under the thermostat housing. At least that is where it was from the factory. The one by the fuse box likely went to cruise control if it has been removed.
 
The connector should be found under the thermostat housing. At least that is where it was from the factory. The one by the fuse box likely went to cruise control if it has been removed.
Alright thanks yeah the one by valve cover should be able to reach near the thermostat housing. Would make it a lot easier if they used different connectors haha.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top