Frank 4 w/ Turbonetics manifold.

[Dannyboy1201]

Can i bolt on a frank 4 turbo to my turbonetics manifold. I need to know before i buy the frank 4. Also I was told that the HRC Eliminator o2 housing will fit w/ the Frank 4. Right now im running the Turbonetics manifold w/ my Hahn Super 20G.

Here is a picture of my Set up w/ the Turbonetics manifold and the Super 20G

You must be logged in to view this image or video.

If that doesnt work go here.


Thanks for the HElp in advance

MY Image Station

 

[DSMTurbos]

if you turbonetics manifold is made for the normal mitsu housing it will. and yes you hrc downpipe will work on the frank 4, or at least should

 

[Dannyboy1201]

Hopefully ill have a chance to take the turbo off today and see if the frank 4 fits. Also what would be the best o2 housing combination w/ the Frank4, turbonetics manifold, 35mm wastegate for me. Any advice would be good. Or should i just keep my eliminator o2

 

[swordfish]

The Frank 4 will not fit that manifold.

Turbonetics manifold = Garrett flange
Frank 4 = Mitsu Flange

jeff

 

[Dannyboy1201]

See i got the HRC Super 20G on the manifold and the S20G fits on the stock mitsu manifold. Ohh well ill find out hopefully today when i attempt it. Thanks for the help

 

[Dannyboy1201]

swordfish was righ doesnt match ohh well time to sell the manifold too.