DJ23GSX
20+ Year Contributor
- 773
- 4
- Feb 22, 2004
-
W. Springfield,
Massachusetts
My first question is it worth porting out the wastegate hole on the exhaust manifold? I could open it up maybe a 1/8" on the 2 flat sides but wasn't sure it's worth dragging out the compressor??
My second question is with an o2 housing with a sealed wastegate hole is it still necessary to weld the flapper door shut? I'm assuming its going to put extra stress on the gasket because the flapper will still blow open a tiny bit.?
You must be logged in to view this image or video.
My second question is with an o2 housing with a sealed wastegate hole is it still necessary to weld the flapper door shut? I'm assuming its going to put extra stress on the gasket because the flapper will still blow open a tiny bit.?
You must be logged in to view this image or video.
You must be logged in to view this image or video.