The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

Resolved Evo 3 16g oil feed and water line bolt size

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

juanpac0

10+ Year Contributor
1,037
4
Oct 15, 2008
San Francisco, California
Hey guys, I've been searching for the size of the bolts holding the oil feed and water line banjo bolts in place. They're pretty big and I don't have a socket big enough to fit over them and I don't want to be blindly buying sockets until I get the right ones. I've only been able to find the actual line sizes.

Thanks
 
hey man, I been doing the same research I think I have all you answers


MitsuTurbo
Oil lines:
Head - 10mm x 1.25
Turbo - 12mm x 1.25

Coolant lines:
Turbo - 14mm x 1.5
Coolant Rail - 16mm x 1.5

Those are the thread sizes

If you are looking for the actual socket size, then buy a larger socket set. you are going to need one eventually, better have all the sockets sizes then have random socket sizes.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top