Evo_3
Proven Member
- 33
- 23
- May 5, 2021
-
London,
Europe
I've been having some trouble with getting my evo 2 to start.
It's a built motor with k20 coil on plug and play kit. It sometimes starts but sounds very rough and like a miss fire, but now it doesn't start at all. Every time I would crank it would backfire through the exhaust and Intake manifold.
Things I've checked:
New k20 coils
New NGK spark plugs
Timing is OK
Has spark and fuel
Fuel pump is good (400lph swirlpot setup)
Cars been down at a garage and they haven't been able to start it either, was told its a wiring issue somewhere and maybe the COP kit but I've no idea.
Has anyone experienced anything like this before? I am looking to go back to normal ht leads set up and see if that helps in the mean time
It's a built motor with k20 coil on plug and play kit. It sometimes starts but sounds very rough and like a miss fire, but now it doesn't start at all. Every time I would crank it would backfire through the exhaust and Intake manifold.
Things I've checked:
New k20 coils
New NGK spark plugs
Timing is OK
Has spark and fuel
Fuel pump is good (400lph swirlpot setup)
Cars been down at a garage and they haven't been able to start it either, was told its a wiring issue somewhere and maybe the COP kit but I've no idea.
Has anyone experienced anything like this before? I am looking to go back to normal ht leads set up and see if that helps in the mean time
You must be logged in to view this image or video.
Last edited by a moderator: