Estimated part out prices? Help give estimates please

[CLeMMeR]

Hey guys thinking about parting out my Talon but JUST motor, whats the best you think I can get for a 6bolt motor, tubular headers(not stock) and a brand new Big 16G turbo setup, afpr, intake, intake manifold, injectors, ecu, distributor, alternator, etc. Everything BUT actual shell and trans
Any input is greatly appreciated thanks

 

[92AWDHX40]

Check the classifeds, ebay, and vendors way to many sources to look, and check prices. Have you checked those sources yet prices will vary.

 

[CLeMMeR]

Gotcha, doing that now. I'm looking to make about a minimum of 500$ think that's possible?

 

[92AWDHX40]

not for that list a new 16g close to 500 alone.

 

[CLeMMeR]

Well my 16g is new, so I'm guessing that means I Will make a minimum of 500$ with everything on that list

 

[Bud92gsx]

New or ran..There is a difference..

 

[CLeMMeR]

New or ran..There is a difference..

Ran for about 800-1k miles

 

[Bud92gsx]

Well a good resale value for all dsmers is half the new price on used stuff..Id think you should be able to get 300 tho..If the turbo is still really solid, and was oiled correctly..

 

[Hult250R]

Are yhese stock parts or aftermarket? Obviously you could get about $300 for the turbo. Running stock longblock you could get a few hundred out of. Stock injectors about $40 if you put em on ebay and the Honda guys pick em up.
If all you want is around $500 id say youll have no problem.

 

[kennyg]

I had a honda guy buy my injectors for that, $40
Sold a MAF and second Throttle body I had for $60, that might have been a little low
1G manual ECU non eprom for $75
Wiper blade arm $10

I think $500 is doable, for me its just a matter of finding people around here who need the parts

 

[Evo_This]

$500 shouldn't be an issue with all you're selling but like KennyG said, issue will be finding buyers. You may be lucky and find local guys but be prepared to ship for best results.