The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Fuel Injector Clinic
Please Support ExtremePSI

Resolved Engine timing mount bolt size

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

SNAKE_15

10+ Year Contributor
572
47
Aug 28, 2012
Bakersfield, California
I'm not sure if I'm not using the correct terminology, but I cannot find the size of the these bolts under the link that gives all the sizes. It's for a 2g mount and I'm using a 6 bolt tensioner arm, thanks in advance!

You must be logged in to view this image or video.
 
From left to right, the first bolt is an M10x22mm length with sealant, the next two are M10x22mm lengths, and the last where the arm pivots is an M8x16mm length.

edit: my bad, the CAPS showed "8x22" which I confused for meaning an M8 bolt, which is not the case. They're M10s like Mello said.
 
Last edited:
From left to right, the first bolt is an M8x22mm length with sealant, the next two are M8x22mm lengths
Are you sure these are M8. I think these are M10x 22 (1ea MD194109 w/sealant & 2ea MD241281). Agree the last is M8 x 16 (MD182537). These are 2G numbers. Hopefully others chime in.
 
1G 6 bolt:
M8x1.25x16 for tensioner arm (MF241251).
M10x1.25x22 and M10x1.25x25 for bracket (MF241281 and MF241282).

1G 7 bolt:
M8x1.25x16 for tensioner arm (MF241251).
M10x1.25x22 and M10x1.25x25 for bracket (MD194109 and MF241282).

2G:
M8x1.25x16 for tensioner arm (MF241251).
M10x1.25x22 for bracket (MD194109 and Two MF241281).
 
1G 6 bolt:
M8x1.25x16 for tensioner arm (MF241251).
M10x1.25x22 and M10x1.25x25 for bracket (MF241281 and MF241282).

1G 7 bolt:
M8x1.25x16 for tensioner arm (MF241251).
M10x1.25x22 and M10x1.25x25 for bracket (MD194109 and MF241282).

2G:
M8x1.25x16 for tensioner arm (MF241251).
M10x1.25x22 for bracket (MD194109 and Two MF241281).
So I'm assuming I use the 2g size even though I'm using a 6 bolt block? I'm doing the 7 bolt head/6 bolt block combo
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top