AntmanAndLittleDi
Proven Member
- 161
- 15
- Nov 12, 2014
-
Russell,
Kansas
We landed ourselves an old laptop that's running on Windows7 Professional. Since then I have downloaded the Complete version of CeddyMods from Ceddy.us and ECUflash. Cu-dos to Ceddy for his research!
We also landed a Open Port 2.0 cable, but I think we will still need to get the adapter after reading through a few posts here.
My main question is: Is there a guide or a walk-through of any kind on how to set this program up on my computer and then a step by step instructional on how to program each parameter? Neither one of us have messed with an ECU programmer of any kind, nor have we ever watched someone else use a programmer.
I know there are certain parts of the CeddyMods program that need to be placed into the ECUflash program, I remember reading that on here in the past and I'm sure I'll find it again. Another question: Is there anything else I need to download other than CeddyMod and ECUflash? And: Is there any other equipment I need to add to my arsenal?
There have been a LOT of mods done to this poor car and it is in dire need of a calibration to help it run a little more smoothly, the fact that it's still sitting at a 14:7 - 14:9 AFR is really amazing. However, when we add the larger injectors that it needs, it sits at 9.5:1 and won't attempt to fix itself even after 30 minutes of idling. There are probably 7-10 other things that need attention as well, hence why I'm just asking for a walk-through rather than harassing everyone here to hold my hand through every keystroke... as much as I would love for my hand to be held, I know I won't learn anything that way .
Any help and tips are greatly appreciated at this point. If it has a bolt, we can turn it, but this ECU reprogramming stuff may as well be voodoo to us . I think there's someone on the other end of town with chickens... you know... just in case I need one to perform any rituals....
We also landed a Open Port 2.0 cable, but I think we will still need to get the adapter after reading through a few posts here.
My main question is: Is there a guide or a walk-through of any kind on how to set this program up on my computer and then a step by step instructional on how to program each parameter? Neither one of us have messed with an ECU programmer of any kind, nor have we ever watched someone else use a programmer.
I know there are certain parts of the CeddyMods program that need to be placed into the ECUflash program, I remember reading that on here in the past and I'm sure I'll find it again. Another question: Is there anything else I need to download other than CeddyMod and ECUflash? And: Is there any other equipment I need to add to my arsenal?
There have been a LOT of mods done to this poor car and it is in dire need of a calibration to help it run a little more smoothly, the fact that it's still sitting at a 14:7 - 14:9 AFR is really amazing. However, when we add the larger injectors that it needs, it sits at 9.5:1 and won't attempt to fix itself even after 30 minutes of idling. There are probably 7-10 other things that need attention as well, hence why I'm just asking for a walk-through rather than harassing everyone here to hold my hand through every keystroke... as much as I would love for my hand to be held, I know I won't learn anything that way .
Any help and tips are greatly appreciated at this point. If it has a bolt, we can turn it, but this ECU reprogramming stuff may as well be voodoo to us . I think there's someone on the other end of town with chickens... you know... just in case I need one to perform any rituals....
Last edited by a moderator: