The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

Eagle talon 1994

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Well update a bit, I had a coolant leak due to the plugs in the block because I didn't use antifreeze. The water neck outlet was badly corroded and was leaking through the radiator cap. I was lucky enough to get all the parts for another coupe and I can start working on the body. I wanted to pass the itv and could not due to harmful gases, there was oil in the exhaust and low compression. I had to remove the engine and work on engine rings, seals and valve guides. The gearbox had problems with 3rd and I also took it apart to check, a worn fork, 3rd/4th synchronizer and 3rd brake. This week they give me a set of gaskets, engine rings, clutch, seals and a gearbox that works well
 

Attachments

  • IMG_20221223_171755035.jpg
    IMG_20221223_171755035.jpg
    452.7 KB · Views: 20
  • IMG_20230311_173841282.jpg
    IMG_20230311_173841282.jpg
    586.5 KB · Views: 20
  • IMG_20230320_131010321.jpg
    IMG_20230320_131010321.jpg
    317.9 KB · Views: 18
  • IMG-20221223-WA0008.jpeg
    IMG-20221223-WA0008.jpeg
    489 KB · Views: 18
  • IMG-20221223-WA0018.jpeg
    IMG-20221223-WA0018.jpeg
    449.4 KB · Views: 17
  • IMG-20230212-WA0011.jpeg
    IMG-20230212-WA0011.jpeg
    331.6 KB · Views: 18
  • IMG-20230212-WA0014.jpeg
    IMG-20230212-WA0014.jpeg
    407.5 KB · Views: 19
  • IMG-20230311-WA0039.jpeg
    IMG-20230311-WA0039.jpeg
    369.9 KB · Views: 18
  • IMG-20230212-WA0013.jpeg
    IMG-20230212-WA0013.jpeg
    381.4 KB · Views: 20
Well, I bring an update of the project, I ordered the exhaust valves that were with steps and wells to be rectified. Then seat the valves to the cylinder head and assemble everything, Distribution kit and new water pump (Kit gates EU and Dolz water pump) used gearbox in perfect condition and new clutch. I put the engine in the car and once everything is connected and with fuel, it starts without any problem. When I went out for a test ride, the clutch would not release and the gears would not engage. I had to disassemble a second time and change the clutch fork and thrust bearing for another in better condition (here in Argentina it is difficult to find spare parts and more of these rare cars) Once that was resolved I began to see why the electric mirrors did not work. It was a wiring problem in the conector and a broken cable in the driver's side mirror. I also bought an amp so it has good sound (speakers are on the way, not sure to put alpine, pioneer or rocksford)
 

Attachments

  • WhatsApp Image 2023-04-23 at 21.08.11.jpeg
    WhatsApp Image 2023-04-23 at 21.08.11.jpeg
    181.3 KB · Views: 14
  • WhatsApp Image 2023-04-30 at 20.06.40.jpeg
    WhatsApp Image 2023-04-30 at 20.06.40.jpeg
    201.9 KB · Views: 16
  • IMG_20230423_145326148_HDR.jpg
    IMG_20230423_145326148_HDR.jpg
    653.6 KB · Views: 14
  • IMG_20230422_170620679_HDR.jpg
    IMG_20230422_170620679_HDR.jpg
    433.1 KB · Views: 18
  • IMG_20230422_160142132_HDR.jpg
    IMG_20230422_160142132_HDR.jpg
    466.8 KB · Views: 18
  • IMG_20230422_155135516.jpg
    IMG_20230422_155135516.jpg
    494.4 KB · Views: 16
  • IMG_20230415_190113024.jpg
    IMG_20230415_190113024.jpg
    495 KB · Views: 16
  • IMG_20230412_104824513_HDR.jpg
    IMG_20230412_104824513_HDR.jpg
    160.8 KB · Views: 15
  • IMG_20230412_104746134_HDR.jpg
    IMG_20230412_104746134_HDR.jpg
    322.1 KB · Views: 21
  • WhatsApp Image 2023-04-21 at 21.13.15.jpeg
    WhatsApp Image 2023-04-21 at 21.13.15.jpeg
    164.4 KB · Views: 14
  • WhatsApp Image 2023-04-21 at 21.13.15 (1).jpeg
    WhatsApp Image 2023-04-21 at 21.13.15 (1).jpeg
    161.8 KB · Views: 12
Well I update the post once again, after a long time I managed to get a complete tube to change mine that was very poorly repaired. They cut and welded at the height of the suspension turret, then painted everything with the car's original color. After that, I had the entire car painted and here is the result, there are still details to solve with the paint but the car is working perfectly and is used every day. All that remains is to fix the air conditioning (condenser not connected) and that would be all.

IMG-20230823-WA0036.jpg


WhatsApp Image 2023-12-09 at 19.53.08 (1).jpeg


WhatsApp Image 2023-12-09 at 19.53.08 (2).jpeg


WhatsApp Image 2023-12-09 at 19.53.08.jpeg


WhatsApp Image 2023-12-09 at 19.53.09.jpeg


WhatsApp Image 2023-12-09 at 20.02.47.jpeg


WhatsApp Image 2023-12-09 at 20.02.48.jpeg


IMG-20230901-WA0025.jpg


IMG-20230901-WA0026.jpg
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top