The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

DSM Graveyard's FWD Dragster 1

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

DSMGraveyardinc

15+ Year Contributor
68
2
Aug 8, 2007
Kalamazoo, Michigan
Hey, here are some pics of what we have been coming up with for the 2010 Shootout!:D

Engine:
Stage 1 Frankenstein - 2G Pistons
Rotating Assembly Balance to .1 Gram:hellyeah:
Graveyard Motorsports 272 Regrinds
Manley Valve Springs (Thanks to Manley Performance:thumb:)
Graveyard Motorsports Steel Racing Valves
ARP Everything
Holset HX 35 w/ Bullseye Hotside(Thanks to Bullseye Power:thumb:)
1250 cc FIC Fuel Injectors (Thanks to FIC:thumb:)

We are still in "Mock Up Mode" So we will have more pic here this weekend! We will keep you posted!

Thanks!
Jon @ DSM Graveyard :thumb:

38772_557606127799_210801567_32581272_6094858_n.jpg


40536_557606142769_210801567_32581273_1224676_n.jpg


40536_557606147759_210801567_32581274_1971112_n.jpg


40536_557606152749_210801567_32581275_7891775_n.jpg


39727_557609176689_210801567_32581299_8354729_n.jpg
 
Well, the chassis was given to my by a friend here in Michigan. It was super clean, and we where gunna do a full "put back together". BUT since we wanted a racecar, we decided to just go full race, and keep it simple. We just want something at our local track that can be there consistently, running high 12's. So if this is as high as we want to go, the FWD is kinda simpler, once we put on the slicks and wheelie bar. We are going to trailer it there, trailer it home.

We wanted to use the Bullseye hotside since its smaller, and we can get a quicker spool out of it. Even though it looks like its gunna have 800HP, its really only going to have about 375-400, PLUS MT, so we are gunna be shifting, and only at 7500ish.

We are running the Stock Trans for the moment, with stock flywheel, 4 puck solid center ACT Disc, and a 2600 ACT Clutch ( Just what we had laying around). When the trans goes, where going to call up Jon @ TRE, probably get a stage 2 or something. Ill see what he wants to do with it.

Im going to be working on this all weekend, and get some more pictures. The pics I have on the iPhone are better than these, its the motor on the stand.

Thanks everyone! :thumb:

Jon @ DSM Graveyard
 
Hey Martin! Yea, you defiantly need to swing by here this week if you get a chance to get out of IL. We are planning of firing it tonight to see how it sounds -Without exhaust :) - And get it kinda broken in. After that, its building the trailer...

I have a bunch of killer pics I took this weekend of the progress that I will try to post here tonight.

See everyone at the Shootout!

Jon
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top