DSM Fuel Tips

[jjm96gst]

Found this nice write up thought I would share it with you guys. Might help out some of the Newbies as well. Enjoy







Ask Sarah- DSM Fuel System Tips

 

[Calan]

Not a bad write-up, but I wouldn't agree with the stock fuel rail being a restriction for 18 psi on a 16g.

 

[DSM_PWR]

for 16-18psi on pump gas and up to 21psi with race gas. If you're boosting above that, you'll need 660cc or 720cc injectors, a higher volume fuel pump, and a high volume fuel rail such as the one from AEM to deal with the additional fuel volume requirements.

I 'd

Who uses Race gas for 21psi? WTF

 

[Calan]

Yeah.

Notice the turbo in that pic on the first page? Not exactly the 16g bolt-on that she is talking about in the article.

EDIT:

Just noticed this also:

A Turbonetics or Greddy blow off valve and an electronic boost controller will be necessary to get to your desired boost

WTF

Ummm... a 1G BOV and $15 worth of parts from Home Depot will get you to 25 psi all day long.

 

[jjm96gst]

Not a bad write-up, but I wouldn't agree with the stock fuel rail being a restriction for 18 psi on a 16g.

I'm sure we can all agree on that one. I should have said decent write up instead of good Most of the info in there is helpful for the most part.

 

[DSM_PWR]

... at least she tried.

Some good info on there though, seems like this would have been written long loong time ago

 

[Calan]

... at least she tried.

Some good info on there though, seems like this would have been written long loong time ago

It's amazing what we'll let slide, depending on the author and whether or not they include their picture.

If you or I had of written that, our grand kids could log onto this thread 50 years from now and we'd still be getting thrashed.

 

[jjm96gst]

Maybe she works for AEM...??? AEM fuel rail and Stand Alone ECU Ya people use it but ECM link is by far the most used, surprised she did not mention it. Sorry guys did not read into it to much just kinda skimmed through it....

 

[Calan]

We're just playin'. It did have some good info in it.

 

[DSM_PWR]

It's amazing what we'll let slide, depending on the author and whether or not they include their picture.

i was thinking the same thing...

 

[turbo addict]

Maybe she works for AEM...??? AEM fuel rail and Stand Alone ECU Ya people use it but ECM link is by far the most used, surprised she did not mention it. Sorry guys did not read into it to much just kinda skimmed through it....

not sure about the 2g but an aem fuel rail is smaller than a stock 1g. we measured.