The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support Fuel Injector Clinic

Digital dash/display

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

talon20g

15+ Year Contributor
205
6
Mar 21, 2007
WHITAKERS, North_Carolina
I'm looking for a digital dash or a digital display that allows multiple sensors to be added. It seems most of them are for standalone ecus or for certain cars. Does anyone make a universal display that can be used on the 1st gen cars? I think I'd rather have this instead of 5 or 6 separate gauges.
While looking around I found this gauge: https://www.bankspower.com/i-2593-b...IUQx8RHRZaTKWZp-SV92hVhE-dtpG5xYaAhqPEALw_wcB
The banks idash seems to check all the boxes except it's not actually a dash. The banks idash has lots of sensors that can be added, monitored and displayed.
 
Last edited:
I'm looking for a digital dash or a digital display that allows multiple sensors to be added. It seems most of them are for standalone ecus or for certain cars. Does anyone make a universal display that can be used on the 1st gen cars? I think I'd rather have this instead of 5 or 6 separate gauges.
While looking around I found this gauge: https://www.bankspower.com/i-2593-b...IUQx8RHRZaTKWZp-SV92hVhE-dtpG5xYaAhqPEALw_wcB
The banks idash seems to check all the boxes except it's not actually a dash. The banks idash has lots of sensors that can be added, monitored and displayed.
The gauge in the link you put above won't work on DSM since that's a CAN-Bus gauge. You see people are using a dash display with a standalone ECU, it's not because it's for standalone ECUs. It's because DSM don't have CAN-Bus and most of standalone ECU would allow you to have CAN-Bus.
 
I was just using the gauge in the link above as an example. Wouldn't mind having something similar that could display multiple areas of data in a central location.
 
I was just using the gauge in the link above as an example. Wouldn't mind having something similar that could display multiple areas of data in a central location.
Just some ideas, as assuming you have a stock ECU with or without ECMLink.

1) Via ECMLink with a tablet, some display etc etc.

2) If it's not via OBD port (ECMLink, etc) or CAN-Bus. Separate gauges/a multi gauge (You would need to install all sensors separately for the gauge besides factory sensors)
- PLX combined sensor module.
https://www.plxdevices.com/ProductDetails.asp?ProductCode=897346002085
- PLX Multi-Touch Gauge.
https://www.plxdevices.com/2-1-16-Touch-Screen-MultiGauge-For-Al-Sensor-Mo-p/897346002368.htm
- PLX MultiGauge Link for Smartphone
https://www.plxdevices.com/MultiGauge-Link-for-Smartphone-Interface-p/897346002931.htm
- eBay display sensor kit
https://www.ebay.com/itm/Sinco-Tech...e-Display-Sensor-KIT-LCD-Screen-/132641287237

3) Use a device that can convert analog/digital/pulse signals to CAN like the AEM one below. That would allow you to use a AEM CD series dash display without having a standalone ECU.
- AEM 22 Channel CAN Sensor Module.
https://www.aemelectronics.com/prod...xpansion-modules/22-channel-can-sensor-module
- AEM CD-5, CD-7 Digital Dash Displays.
https://www.aemelectronics.com/prod...ys-adapter-harnesses/cd-digital-dash-displays
 
Last edited:
Just some ideas, as assuming you have a stock ECU with or without ECMLink.

1) Via ECMLink with a tablet, some display etc etc.

2) If it's not via OBD port (ECMLink, etc), CAN-Bus. Separate gauges/a multi gauge (You would need to install all sensors separately for the gauge besides factory sensors)
- PLX combined sensor module.
https://www.plxdevices.com/ProductDetails.asp?ProductCode=897346002085
- PLX Multi-Touch Gauge.
https://www.plxdevices.com/2-1-16-Touch-Screen-MultiGauge-For-Al-Sensor-Mo-p/897346002368.htm
- PLX MultiGauge Link for Smartphone
https://www.plxdevices.com/MultiGauge-Link-for-Smartphone-Interface-p/897346002931.htm
- eBay display sensor kit
https://www.ebay.com/itm/Sinco-Tech...e-Display-Sensor-KIT-LCD-Screen-/132641287237

3) Use a device that can convert analog/digital/pulse signals to CAN like the AEM one below. That would allow you to use a AEM CD series dash display without having a standalone ECU.
- AEM 22 Channel CAN Sensor Module.
https://www.aemelectronics.com/prod...xpansion-modules/22-channel-can-sensor-module
- AEM CD-5, CD-7 Digital Dash Displays.
https://www.aemelectronics.com/prod...ys-adapter-harnesses/cd-digital-dash-displays
Wow😳 Wiseman indeed
 
I do have ecmlink. Thank for for spending the time to post all that. I do appreciate it. I've been out of dsm's and cars in general for over a decade and seem to have forgotten a lot. When I do searches I find that my wording isn't close enough to produce good results.
 
@talon20g , use Google, Bing or DuckDuckGo and search with that search engine for your issue/question/problem and end the search box with "DSMTUNERS". That always brings me a lot of results to choose from.
Like this, I did a search for a thread for a 420a member.
You must be logged in to view this image or video.

Marty
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top