talon77
15+ Year Contributor
- 255
- 115
- Sep 12, 2004
-
annapolis,
Maryland
This is the Build Thread for Dedicated Road Course Trackday/Autox Taser. Reply below.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.
This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Southbend clutch with ACT streetlight flywheelView attachment 648378View attachment 648379View attachment 648381View attachment 648382
Trans bolted up, with the clutch release lever sitting just slightly to the right of centerline (using used Comp Clutch lever/ball un-shimmed, and new OEM throw out bearing)
View attachment 648384
I installed these bad boys on my filthy car today! I bought these from here years ago and finally got around to installing them, and they look great!!!View attachment 649030View attachment 649031View attachment 649032View attachment 649033
Thanks for sharing the info! I ended up going with the Kirkey Road Race aluminum seat because it was the narrowest one I could find, and it barely fit. The previous owner installed a welded drag roll bar that fit around his Kirkey drag race seat, so I had limited room/options because I didn’t feel like cutting up the roll bar for the moment. If I were a big guy, this solution would not have worked at all! But I’m not that big so the seat is reasonably comfortable for me.Depending how big you are.... Sparco EVO QRT seat with the HD aluminum side mounts and their seat base will fit with a little work. If you need a wider seat then the regular, it would probably still fit but I might be a little off center.