The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Crunchy Clutch Pedal 2g Talon

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

0r1landoDSM

10+ Year Contributor
213
0
Nov 10, 2010
Long Island, New_York
been trying to figure this out for a while my first assumption was air but i've lost count at the amount of times i've bleed this thing. i've been letting it drag on because of lack of time to deal with it. i kept going under the assumption maybe its air so i finally decided to make a detailed video. clutch kit is fairly new maybe about 10k or lil more miles on it,slave is new, ss line new and master cylinder new, HELPFUL input will be appreciated.

cold start car shift like butter after a duration drive the "crunchy" sound comes up and shifting becomes not so smooth. i looked online and tried greasing the pivot point where the slave makes contact with fork. tried greasing the master cylinder shaft didnt help either...

after alot of reading i've seen people say its the throw out bearing, if you also think its the throw out bearing please give a detail reason on why please.

You must be logged in to view this image or video.
 
Could be the throw out bearing engaging the pressure plate.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top