The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support STM Tuned

Cool Random Videos with non-DSMs

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

'' well dom i see a cold-air intake, t3/t4 turbo, direct port nitrous injection''

''yea, and a stand alone fuel management system...not a bad way to spend ten thousand dollars'' ROFL
 
Yea you guys must have all emailed him or something, because he took out the 1/4 mile time. You guys made him cry. I love how he ran that fast with the rebuilt stock turbo made to perform better. what they do port it? LOL
 
19Eclipse90 said:
Nelson is running an auto isn't he? And someone else (much less modified) made a video of auto AWD drifting, I forget who it was.
I'm a frequent visitor over at 3si and I've been following up on all the progress the platform has made within the past 5-6 months. It'll be interesting to see what kind of numbers Nelson (if he finally runs it), Matt, and Chris will be putting down next season.
Mellon, I love your video collection, it's the best of the best 3/S's, good stuff to watch.:thumb:


thanks man I've been working hard on the site by scouring the net for new videos.

right Nelson also has an auto in one of his cars but he hasn't done much more than some street runs at low boost to my knowledge.

You must be logged in to view this image or video.
Click here to see Video

You must be logged in to view this image or video.
Click here to see Video
 
19Eclipse90 said:
Ha, Si, ellos son muy muy loco.
I forget who exactly, but I'm pretty sure it's Ray Pampena who is building a 4.5L stroker.... Now that's loco.


yep, Montero engines FTW :thumb:
 
MELLON!


Ive seen your vids on other boards


racing 12345678, when are you going to have new vids out?
 
That turbo still blows 32psi
 
I've taken a break from that kind of video for now... I recently spun a bearing in the Stealth and with my job change I'm down on extra cash so she's resting in the garage. Hopefully things will be back as normal in 07, I'm working on it, the car is going to be much stronger this go around too.
 
The turbo that isn't actually plumbed to the intake manifold, mind you.
 
If he could find the nitrous "siloniod" (pronounced "sih-LOH-nee-odd"), I'd take the bus down to south Phoenix right now, cash in hand, for that thing.


Oh wait. I forgot that I already have two broke-ass, POS 1Gs. :(
 
Dont worry, we'll fix the pistons and valves then tune the nos timing system it'll run 9's
 
dr1665 said:
If he could find the nitrous "siloniod" (pronounced "sih-LOH-nee-odd"), I'd take the bus down to south Phoenix right now, cash in hand, for that thing.


Oh wait. I forgot that I already have two broke-ass, POS 1Gs. :(

Damn 1g's....






OMG, i seriously want to meet this idiot. He doesnt hang out down here in the dirty south(bell). Where does he?!
 
hes running his bov off the valve cover breather
 
seriously tho, what stealth doesn't spin its bearings every once in a while?


LOL
 
twack said:
hes running his bov off the valve cover breather
ROFL I just noticed that. I feel bad for that motor. Oil coming out, and boost going in. So sad.
 
Nelson Bernarde's 935 awhp 3000gt twin GT4088 @ 32psi through auto trans 11.7s af ratio and waaaay conservative timing. we hit the end of the rope with the dual walbros and couldnt go any more

<a href="http://3svideo.vidiac.com/video/e85d6270-42d5-4438-b7c6-98750120a83e.htm" target="_blank"><img src="http://thumbs.vidiac.com/e85d6270-42d5-4438-b7c6-98750120a83e.jpg" width="115" height="86"></a><br><a href="http://3svideo.vidiac.com/video/e85d6270-42d5-4438-b7c6-98750120a83e.htm" target="_blank">Click to see Video</a>




842awhp run

<a href="http://3svideo.vidiac.com/video/9c20572a-3a9d-4558-935e-9875013f048d.htm" target="_blank"><img src="http://thumbs.vidiac.com/9c20572a-3a9d-4558-935e-9875013f048d.jpg" width="115" height="86"></a><br><a href="http://3svideo.vidiac.com/video/9c20572a-3a9d-4558-935e-9875013f048d.htm" target="_blank">Click to see Video</a>
 
Nice to see these 3000GT guys get serious with making power. I'd love to see that beast on the road.
 
Being that the car is a Auto it just looks that way since it has much longer gears.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top