The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

China's 91 GST project DD

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

CHINA1G

10+ Year Contributor
64
0
Jul 18, 2011
Albany, Georgia
Here are some pics of my progress in aday and a half. Hope you enjoy and comments are welcome!!!!

Mods....

IC setup-
Punishment racing FMIC and pipping

Intake-
Dejon short ram

Turbo-
Greddy T28

Blow off valve-
TurboXS

Boost controller-
TurboXS set at 20PSI

gauges-
Prosport electric Boost gauge
Inovate lc-1 wideband
prosport oil pressure

Brakes-
stoptec by brembo slotted Rotors

Suspension-
AGX shocks with Ground Control Coils
Matrix strut bar

Tuning-
3" GM MAF
MAF translator

Fuel-
Walbro 255LPH
Aeromotive AFPR
FIC 550cc, soon to be 650cc's

Cooling-
stock single fan
Fluidine radiator

Drivetrain-
2100PP
center force 4puck sprung
stock flywheel

Exhaust-
Custom side exit

I have forgotten a few little things im sure haha
103_7390.jpg

103_7391.jpg

103_7407.jpg

103_7398.jpg

103_7405.jpg



My work has just began on this MV3=Maverick V3

This is about 30-35 man hours of work, what do you think?
103_7409.jpg

103_7416.jpg


This is what i got out of it....looks pretty good for spray paint
103_7426.jpg


103_7430.jpg


Found a replacement side marker and the center piece that has the mitsu sign
103_7444.jpg


I also riped the seats out and got to scrubbing,Installed the new head unit/XM Satellite and found a STOCK boot cover....now if i can only find a stock shift nob
103_7454.jpg

And a good oll wash,clay and wax!!!!!
103_7457.jpg

103_7458.jpg
 
decided to rip the interior out again and re-clean it

Then i decided to re-cut and buff the hood and it looks good!!!
http://i377.photobucket.com/albums/oo214/chinamannn69/103_7481.jpg
103_7471.jpg

103_7472.jpg

103_7484.jpg


Just a few randoms from a while ago
103_7495.jpg

100_7517.jpg

061311213500.jpg

061311213541.jpg


Fuel cut on the dyno.
th_102911113119.jpg


failed clutch
112511141007.jpg

the replacement
112511155604.jpg

The replacement failed
120611163744.jpg

So I got a 4 puck.... So far so good!
1209110855.jpg

body work begain
DSC_0943.jpg

DSC_0951.jpg

DSC_0961.jpg

DSC_0969.jpg

122011213740.jpg

122811135047.jpg


Got new rims in the process and
Painted them
DSC_0395-1.jpg

Yes I did paint it...
0129120118a.jpg
 
0218121458-1.jpg

Got the vent gauge holder

Prosport performance gauges:
oil pressure
boost
and fuel pressure

0312122137.jpg

0312122136a.jpg

0314122042a.jpg

0312122334.jpg


UHH OHH
DSC_1017.jpg

DSC_1021.jpg


And this is how it sit's right now..

DSC_0995.jpg

DSC_0996.jpg

DSC_1004.jpg

DSC_1030.jpg

DSC_1032.jpg

DSC_1039.jpg


Thank you for looking!! Say whats on your mind about it! I want to here your thoughts about it so far.
 
Where did you get that Vector Imaging triple vent bezel? I've been searching everywhere and the only place I can find it is some shady looking European site.

I actually got the gauge holder with my gauges. And i bought tgem locally :(

I think i still have it. I had to move back to the gauge pillar because prosports oilpressure electric gauge line is to short to run threw the dash LOL. But if i find it and it's not destroyed you can buy it from me.
 
I actually got the gauge holder with my gauges. And i bought tgem locally :(

I think i still have it. I had to move back to the gauge pillar because prosports oilpressure electric gauge line is to short to run threw the dash LOL. But if i find it and it's not destroyed you can buy it from me.

Let me know for sure! I will buy it immediately.

Thanks!
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top