The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support Fuel Injector Clinic

ECMlink Changed injectors and manifold, car won't start

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jeffdbridges1

Probationary Member
5
5
Jul 3, 2021
MONROE, Louisiana
I changed to Magnus SMIM, 750 injectors and s90 throttlebody. Now car won't start.

Here's log maybe I don't have something right in link. 2g DSM 7 bolt
 

Attachments

  • log.2022.10.29-04.elg
    12.3 KB · Views: 22
Link settings look ok (besides your timing tab!! Set all those back to 0!)

You must be logged in to view this image or video.


I would also check the "lock mdp" box in the inputs tab. Double check all your wiring to make sure you didn't leave anything unplugged. Check fuel injector wiring and clips. Maybe even check for boost leaks.

Also, your battery voltage is too low. Need to charge that battery back up.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top