The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support STM Tuned

2G 97-99 CAS wiring to 95 harness

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

myturbo

10+ Year Contributor
448
12
Nov 28, 2008
wichita, Kansas
Need to know the correct way to wire a 97-99 cam sensor , on a 95 harness.


Yes I know how to do a 1g cas wire in. & also know swapping plug wires for 99 cas on 95. Which I don't need to do as I have link.


I have searched Google & tuners for this. Only found 1 thread off this exact issue . Their were 0 Replies. Yet plenty of people that have done it.
 
All you're doing is extending the wires and matching the colors from the '95 harness to the '97+ CAS.
 
Check continuity of the wires you have with the "other" ends. Use the 2G electrical connections link provided to get the correct orientation in the connector.

The should-be-blue wire goes to ECU pin 88.
The should-be-black wire goes to ground.
The should-be-red wire is what's left over.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top