enriquez2000
Proven Member
- 2,277
- 820
- Oct 5, 2014
-
fort collins,
Colorado
This was a butt pucker project. It took me 18 months to get this hood. 1st time it came shattered. So here we are 18 months and $1200 later and Im going to drill holes in it... it doesnt even come with a factory catch so no choice!
Drill these holes out next to your headlight tab
Put grease or paint on top of pin
Close good to mark the underside of your hood
Drill pilot holes all the way through(clench your cheeks now)
Mask the top of your hood so you dont scratch anything
Using the recommended hole saw cut through the top of your expensive hood
I missed the pics underneath but in my case you used a 2.5 hole saw so you can screw nuts on the back side. Tnen recheck your holes
Make sure everything lines up... use thread lock and tighten it all down!
Now you have pins in your hood and can go relax anyway you want.... We ordered imsonia cookies... you can crack a beer if you prefer.
Drill these holes out next to your headlight tab
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Put grease or paint on top of pin
You must be logged in to view this image or video.
Close good to mark the underside of your hood
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Drill pilot holes all the way through(clench your cheeks now)
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Mask the top of your hood so you dont scratch anything
You must be logged in to view this image or video.
Using the recommended hole saw cut through the top of your expensive hood
You must be logged in to view this image or video.
You must be logged in to view this image or video.
I missed the pics underneath but in my case you used a 2.5 hole saw so you can screw nuts on the back side. Tnen recheck your holes
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Make sure everything lines up... use thread lock and tighten it all down!
You must be logged in to view this image or video.
You must be logged in to view this image or video.
You must be logged in to view this image or video.
Now you have pins in your hood and can go relax anyway you want.... We ordered imsonia cookies... you can crack a beer if you prefer.
You must be logged in to view this image or video.