The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Buying 3in exhaust suggestions please

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

LuckyTurbo

20+ Year Contributor
59
0
Jan 26, 2003
I'm in the market for a 2g FWD 3in exhaust after the o2 housing. So going to need downpipe, testpipe, and cat-back. I was interested in Buschur's system but he does not make a 2g FWD downpipe thats 3in only 2.5. Hoping to keep the exhaust as quite as possible, dont care for those loud ones. Mixing and matching would be acceptable also, try and limit suggestions to 1st hand experience. Thanks!
 
If you plan on upgrading your turbo some day, go with the 3 inch. It will be louder than the 2.5, but if you install a silencer you'll be allright. I have a 16G, and I'm using the RRE downpipe/cat. The downpipe is actually 2.5 inches from the O2 housing and then changes to 3 at the flex bend (good thing to have).

Good luck
 
RnR has had nothing but good reviews, from what I have read on the boards. They have good prices for there turbo back 3in exhaust.

Or you could piece on together by buying the N1 muffler and having a exhaust shop madrel bend you a 3in catback and then going with the rnr downpipe.

You deff. have to do some research around town but I am sure someone in your town does mandrel bent piping and a muffler is not hard to find at a cheap price.
 
I just purchased a tsudo fireballl 3in catback. Its a very nice exhaust that is made really well and fits like a glove. Anyways I took a chance buying it b/c i never seen one on a dsm and have never heard one. But i have to say it is one of the nicest sounding exhausts around and i get many compliments on it. Very quiet idle and very deep tone that stays deep with no rice sound. At high rpm's it actually seems to level out and get quieter.
 
RnR Racing did a very clean job on the 3" O2-eliminator downpipe I picked up from them. Good welds, solid construction all around.

If a two-piece design is important to you, take a look at Hahn Racecraft; everyone I know who has one of their units is happy with it, although they're a little pricy.

You might also want to hit the trader; I know a few people now who've picked up 2.5" and 3" turbo-backs for a song that way, if you don't mind used.
 
Looks like RnR it is then. You were right their prices are outta control, can't believe they are that cheap. Thanks for the help guys, oh and thanks for the convience of the links in the post Logic.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Build Thread Updates

Latest Classifieds

  • For sale 4G63 AEM tru time adjustable timing gears
    AEM tru time adjustable timing gears (cams are sold)Fits 1G/2G DSM, GVR4 and Evo 1-3$235usd...
    • Dsm_canadian_mike
    • Updated:
    • Expires
  • For sale 2g 2g Talon drivers side airbag
    Drivers side 95-98 Talon airbag. Excellent condition. Message 702-741-6987
    • Galant665
    • Updated:
  • For sale 1g TD05 wastegate canisters
    TD05 wastegate canisters. Have both fixed rate and adjustable. Can get two into a USPS...
    • Galant665
    • Updated:
  • For sale Gates 6 bolt water pump
    Brand new, won't be using after all. Purchased new from STM. Price is shipped and PayPal'd.
    • Mahreeoh17
    • Updated:
    • Expires
  • For sale 1g 1g Intake manifold.
    1g intake manifold. 4 inch plenum. 2 1/4 runners. Ford TB flange. Comes with throttle cable...
    • Galant665
    • Updated:
Back
Top