The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support ExtremePSI

Brake install tips!!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I know it’s the basics and quite obvious to do, but often over looked. When Assembling new brakes be sure to clean off all surfaces where the pads contact the calipers. Then use which ever brake lube on those contact surfaces. I use anti seize. Also since there a frequent item be sure to anti seize the threads on the bolts as to not round off bolts or break them off in the holes!

Also when installing new rotors make sure to clean the film of grease off them. They caught them from the factory with Greece to keep them from rusting on the shelf .
 
Last edited by a moderator:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top