boost controller ????? help

[Fred9981]

whats up

my girlfriend has a 95 auto gsx i have a boost controller to put on it but i dont know how to install it can someone help

also how much boost can i have on a t25 with stock fuel system, 2.5 downpipe and no cat and 2.5 exhust the other mods are NGK wires and spark plugs and upper intercooler pipe with greddy bov and knn filter and obx underdrive pulley


thanks

 

[nine5raptor]

This belongs in the newbie forum....

Is it a bleeder or ball/spring controller? If it is a ball and spring, then the end inline with the adjustment screw is tapped into a boost souce (turbo nipple or cbv line) and the other side (perpendicular to the adjustment screw) goes to the wastegate of the turbo.

You can run ~15 psi.

http://www.belitski.com/vfaqhallman.html

 

[Megaman]

http://sddsm.org/pages/vfaq-mbcinstall.htm

 

[Fred9981]

im getting high boost spikes and it stays at 20 psi and i cant adjust it i turn the controller and it doest do anything i have a turbonetics controller

thanks

 

[BOOSTED4LIFE90]

Wastegate actuator arm might be stuck open! Id check that before you blow your t-25. Just my 2 cents.Later!

 

[nine5raptor]

I doubt the wastegate suddenly stuck closed when you switched controllers.

Go back and check your connections. Are you loosening it to lower boost?

 

[kpt4321]

The turbonetics controller is backwards from a regular Hallman, if I remember correctly. Thus, you may have to turn it clockwise to bring the boost down.

 

[Fred9981]

here are the instuctions



http://www.dsmtuners.com/gallery/showphoto.php?photo=29154&password=&sort=7&thecat=500


i hooked up the boost source to the vac. hose that hose to the bov i T off and i put the other end to the wastegate