The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

bluebird sr20det

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

sacestar836

20+ Year Contributor
335
0
Sep 14, 2002
my friend just got one of these front clips for his nx2000 and he insists it came with a t28, but i think its just a t25

do you guys know what comes in these?
 
http://members.shaw.ca/kfgroup/sr20det.htm
http://www.srswap.com/html/info/faq_specs.htm



Red-Top S13 SR20DET 180SX 91-93 and Silvia 91-93
Black-Top S13 SR20DET 180SX 94-98

BLACK TOP SR20DET
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1
Horsepower: 205hp at 6000rpm
Torque: 203 ft/lbs at 4000rpm
Stock boost: 7 psi
Throttle body bore: 60mm
Injector size: 370cc/min
Compressor: T-25, 60 trim 56mm BCI-1 compressor.
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Journal bearings

Performance:
The stock turbo will be safe to 13-15 psi. After that, the turbo is past its efficiency range, and power increases will fall off and are not worth the risk of turbo damage. The engine should produce 230-250 RWHP at safe boost.

RED TOP SR20DET
Displacement: 1998cc (2.0 liter)
Cam type: DOHC 16 valve, chain driven cam sprockets
Bore and stroke: 86mm x 86mm
Compression: 8.5 : 1
Horsepower: 205ps at 6000rpm
Torque: 203 ft/lbs at 4000rpm
Stock boost: 7 psi
Throttle body bore: 60mm
Injector size: 370cc/min
Compressor: T-25, 60 trim 56mm BCI-1 compressor.
Turbine: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
Center Section: Journal bearings

Performance:
The stock turbo will be safe to 13-15 psi. After that, the turbo is past its efficiency range, and power increases will fall off and are not worth the risk of turbo damage. The engine should produce 230-250 RWHP at safe boost.

This information was found using www.google.com

Searched the web for: sr20det turbo specs.

This information should give you a answer.
Thank you.
 
ok its the red top...do you think he would kill the turbo with a fmic and 3" exhaust at 16-17psi?

hes INSISTING when he gets the gauge and controller hooked up hes gonna do 17 at the track, but i tell him 15, i just need someone to agree with me
 
Originally posted by 98RedGs
http://members.shaw.ca/kfgroup/sr20det.htm
http://www.srswap.com/html/info/faq_specs.htm



Red-Top S13 SR20DET 180SX 91-93 and Silvia 91-93
Black-Top S13 SR20DET 180SX 94-98





This information was found using www.google.com

Searched the web for: sr20det turbo specs.

This information should give you a answer.
Thank you.

those specs are for the silvia engine though, this is for the same engine that is in the bluebird GTi-R and some other cars (front engine car) so those specs might not be accurate, or they might be as i don't know


Originally posted by DSMSpyder99
umm i dont see one difference between the black and red

there are a few internal differences but the main one is that the black tops are newer motors
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top